2012 New Machine! LED Lamp Assembly Line With Fan

2012 New Machine! LED Lamp Assembly Line With Fan 1.PVC belt Conveying 2.roller driving 3.electromagnetic speed control

2012 New Machine! LED Lamp Assembly Line With Fan  

I. Project: MH-LED lamp assembly line

III. Quantity: 1 set

IV. Features: PVC belt Conveying, roller driving, electromagnetic speed control

V. Functional features: This equipment is applicable to various plants with flow production for small-medium size material conveying. The driving system adopts electromagnetic speed regulation system, which is stable, secure, convenient and quiet.

VI. Material Selection and Remarks

1. Power: The motors use Hongling Brand 0.75~1.5KW motors manufactured by Jiangmen Motor Co., Ltd, Yashiba Brand 80 model 1:60 peed reducer made in Taiwan, Wuzhou Brand magnetic speed regulator with stepless speed regulation. Linear speed at 0-8M/min may be regulated freely.

2. Machine body and stand: made of 50×40×1.5mm rectangle steel pipe by welding. Supports are made with Ø25mm galvanized roller, arranged with pitch of 25mm. The stand bars are equipped with galvanized adjustable cells. Machine head and tail are made of 1.2mm cold plate, and the machine body is 2m per section.

3. Conveying belt: quality green lightweight conveying PVC belt imported from Holland, 2mm thick, 400mm wide, total 10~50m long, which is of seamless thermal shrinkage ring connection.

4. Light stand and lighting: Y-shape light stand, one per 2m, made of 40×40×1.8mm rectangle steel pipe, with 2000×50×25×0.8mm coated traceway for connecting power. The 40W single daylight lamp tube stand is used, with one stand per 1.4m, arranged along both sides.(The line have fans.)

5. Worktable: Long worktable of 15000×300×750mm, with 130×23×2mm aluminum. Table board is made of 15mm quality plywood, affixed with 2mm thick anti-static rubber, arranged along the machine body sides.

6. Work Power: made of 4 points plastic traceway, set on the two layer racking, the middle way set up 220V three,two side outlet plug.(1m/one socket).

7. Light skirt guard: In light shelves, made of 1.5mmA3 cold plate, bent into a 30 × 120 × 30mm around the edge of the shield.

8. Two layer racking: Pull the belt in the body at 400mm, supporting the use of 40 × 40mm square tube production, a width of 630mm, two-story units plate with 1.2mm cold plate bending roll forming.

9. Operation card: Two operation card stands are set under the light stand, made of H-shape aluminum guide rail. At each work position is arranged a 300×400×1.5mm transparent glass.

10. Gas pipe: A gas supply pipe is set in the middle of light stand, made of 4cm galvanized water pipe, with one tap and plug per 1m, arranged along both sides.

11. Electrical control: Across the board by an electrical control box to complete distribution, including the power supply at about two-way control, lighting control system uses four, that every one lit a control, the user can control the lighting depending on the application method to reduce the waste of resources.

12. Machine body color: Machine metal surface will be of gray color or (other colors are available as per request of customer).

2012 New Machine! LED Lamp Assembly Line With Fan